 |
|
|||
| Page 2 of 3 | ||||
 |
||||
| Insulation Type |  |
|
|
|
|
|
Temp Class | 155oC | 155oC | 180oC |
| Sizes | .190mm to 5.000mm | 0.190mm to 5.000mm | 0.190mm to 5.000mm | |
| Reference | IS 13730 (Part-3) : 1996 | IS 13730 (Part-20) : 1993 | IS 13730 (Part-8) : 1996 | |
| Dimensions | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | |
| Electrical Resistance | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | |
| Elongation | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | |
| Springiness | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | As per IEC 317 - 0 -1 | |
| Flexibility & Adherence | As per IEC 317 - 0 -1 K 130 mm | As per IEC 317 - 0 -1 K 130 mm | As per IEC 317 - 0 -1 K 110 mm | |
| Heat Shock | Min. Temp. 175oC as per IEC 317 - 0 - 1 |
Min. Temp. 175oC
As per IEC 317 - 0 - 1 |
Min. Temp. 200oC
As per IEC 317 - 0 - 1 |
|
| Cut Through | No Failure will occur within 2 Min. at 240oC | No Failure will occur within 2 Min. at200oC | No Failure will occur within 2 Min. at 300oC | |
| Resistance to Abrasion | ||||
| Resistance to Solvents | As per IEC 317 - 0 - 1 | As per IEC 317 - 0 - 1 | As per IEC 317 - 0 - 1 | |
| Breakdown Voltage Test |
As per IEC 317 - 0 -1, Elevated Temp-155oC |
As
per IEC 317 - 0 -1, Elevated Temp. 155oC |
As per IEC 317 - 0 -1, Elevated Temp. 180oC |
|
| Continuity of Insulation | As per IEC 317 - 0 - 1 | As per IEC 317 - 0 - 1 | As per IEC 317 - 0 - 1 | |
|
Temperature Index Test (If specified) |
Elevated Temperature is 155oC | Elevated Temp. 155oC | Elevated Temp. 180oC | |
| Resistance to refrigerants | Test Inappropriate | Test Inappropriate | Refrigerent
- extraction with trichloroehylene/methanol/ Monochlorodifluoromethane or blistering with monochloro Difluoromethane |
|
| Solderability | Test Inappropriate | Solder Bath Temp. 390 5oC As per IEC 317 - 0 - 1 | Test Inappropriate | |
| Heat and Solvent Bonding | Test Inappropriate | Test Inappropriate | Test Inappropriate | |
| Dielectric Dissipation Factor | Test Inappropriate | Dissipation Factor tan d < 30 x 10-4 at a frequency of 1000 Hz. | Test Inappropriate | |
| Resistance to Transformer Oil | Test Inappropriate | Test Appropriate but no requirement Specified | ||
| Loss of Mass | Test Inappropriate | Test Inappropriate | ||
| High Temperature Failure | Test Appropriate but no requirement Specified | Test Appropriate but no requirement Specified | ||
| Packaging | As per IEC 317 - 0 - 1 | As per IEC 317 - 0 - 1 | As per IEC 317 - 0 - 1 | |
| * This insulation is also available for aluminium wire & strips | ||||
